Rondo has modified the MAXIframe 202 sill/header bracket to ensure there is no overhang of the section that could interfere with the linings, whilst still maintaining security of the MAXIjamb sill/header section during installation.
The new 202 bracket design keeps one fixing flange visible and the other invisible. Once the bracket is installed against the web of the MAXIjamb, the MAXIjamb section has to be ‘rolled’ into place.
The exposed flange has two pre-drilled holes for fixing to the MAXIjamb, whilst the flange inside the MAXIjamb should be secured by fixing the screws through the top, 25mm in from the inside jamb face and 25mm from the outer edge of the section.
This new bracket is fixed to the MAXIjamb with the shorter internal flange facing the opening. For user convenience, the Rondo 202 sill/header bracket is stamped accordingly on its inner face.
Once finally secured into place, the outer face of the 202 sill/header bracket will align neatly with the face of the MAXIjamb section, both internally and externally.