The underfloor heating system from Raychem are electric underfloor heating systems which are installed close to the floor surface resulting in a quick warm up of the room.

This is from the uniform heat distribution across the floor and it is possible to set the thermostat two degrees lower than usual, without any loss of warmth.

The system provides complete room heating including warm floors and can be used to complement the existing heating system.

Electrical underfloor heating causes less air movement, hence less dust. It is applicable in bathrooms or wet rooms whereby wet floors and rugs will dry much faster, so there will be less risk of mildew or mites.

Negligible electro-magnetic fields

Household appliances and home electronics can produce electro-magnetic fields. Raychem products emit the lowest possible electro-magnetic fields from the twin wire construction.

The Smart underfloor heating can be installed under any floor as it does not take up any space in the living area, giving the freedom to position furniture freely.

The company’s various systems can be installed under all floor coverings like tiles, marble, wood, laminate or carpet. The systems can be fitted directly on the existing floor (wood, plaster concrete).

T2Red

The T2Red self-regulating system senses other heat sources such as solar radiation, electrical appliances and lighting and it automatically adjusts its heat output accordingly.

It can be installed on all subfloors and is easily adapted to all room sizes and shapes.

T2Red with T2Reflecta

This system combines the self-regulating T2Red heating cable with T2Reflecta, the pre-grooved, thermally insulated, aluminium- covered plate.

It provides extra energy savings of 20 per cent or more. The thermal insulation and aluminium plates reduce heat loss and provide even heat distribution.

The T2Red with T2Reflecta system can be used for wooden or laminate floors.

T2QuickNet — Thin self-adhesive heating mat

The thin T2QuickNet can be used for renovation — especially for tile floors. The 3 mm mat is laid directly in the filter or adhesive.

It can be installed on all subfloors which are sufficiently insulated and conforming to be applicable building regulations.

T2QuickNet exists in two versions: T2QuickNet 90 can be used on all solid subfloors and T2QuickNet 160 when more output and a faster heat up time is required.