Our wood finish aluminium provides the timber look that architects and designers desire, especially in situations where it would usually be impractical to use real timber.

By utilising a lightweight, non-combustible material such as aluminium, designers can avoid issues such as weight restrictions and fire compliance, which can compromise the overall design intent.

Below, we show you the advantages of aluminium when used as a timber substitute, along with the various options we provide for feature walls, ceilings and facades.

Why use timber look aluminium?

Aluminium offers a huge range of finishes as an interior lining or exterior cladding product, and is often used in applications such as:

Facades
Interior walls
Soffits
Ceilings
Interior to exterior transitions
Areas requiring Group 1 rated or non-combustible materials

Along with powdercoat and anodised options, timber look options are a popular choice largely due to the following benefits they provide over traditional timber battens and cladding:

Aluminium is deemed non-combustible and Group 1 compliant

The major reason why designers and architects choose to use a timber look aluminium product is to meet fire compliance requirements. Aluminium meets the highest standards of fire compliance and can be used in almost any application.

Aluminium is stronger

Aluminium is much stronger and resistant to movement when compared to timber. This allows for lengths of up to 6 metres and larger spaces between fixings, minimising visual disruption and allowing for an even faster installation.

Aluminium lining products weigh less and are far more resistant to movement

Aluminium battens and cladding typically weigh considerably less than timber alternatives, due to the hollow shape of the battens and the reduced thickness of the cladding boards. This means the entire feature wall or ceiling weighs less, requiring less structural support.

Timber products can also be susceptible to movement depending on factors such as moisture, whereas aluminium is highly resistant and will not warp or cup like timber can.

Aluminium requires less maintenance

When used externally, traditional timber facades typically require maintenance every 6-12 months, which can even include a re-coating depending on the desired outcome. This maintenance schedule can be minimised by using timber look aluminium, as it requires little to no maintenance.

Wrapping machine

Timber look options

We offer two timber look options for you: Wood Finish Aluminium and a Real Timber Veneer range that allow us to provide the right solution depending on the needs of your project.

Both ranges are manufactured in similar ways, through a process of wrapping aluminium battens in a thin coating. This process takes place in our Australian factory, using the highest quality materials from all over the world. The specially designed wrapping machine glues the coating into place, then uses a series of rollers to ensure a strong connection.

Wood finish aluminium

Our range of wood finish aluminium uses a thin vinyl coating, which is wrapped around the aluminium battens. Printed on this coating is a photorealistic timber look pattern to provide the timber aesthetic seen on real timber species; however, on request, we can match existing colours or discuss any particular requirements.

Exterior grade

The biggest advantage of our wood finish aluminium is its ability to be used on interior and exterior applications. The aluminium, the wrap layer and the glue holding them together are all extensively tested to ensure long term performance.

Highly resistant to fade

When choosing a timber alternative, an important aspect is the coating’s ability to retain its colour. Many designers choose timber look aluminium to avoid the natural greying process that timber goes through. Long term testing under simulated weather conditions indicates that our wood finish aluminium is up to three times more resistant to fade than other woodgrain powdercoat competitors.

Real timber veneer

As the name implies, our real timber veneer uses actual timber in the place of a vinyl wrap or woodgrain powdercoat, making it only available for internal applications. The veneer consists of timber sliced down to under 0.5mm thick, then delivered in rolls.

This veneer is then applied to our aluminium battens, blades or cladding using our wrapping machine in our Australian factory. Due to the extra processing involved in using real timber, a smaller range of four colours is available in real timber veneer. Some advantages of this timber look option include:

Natural variation

With any timber alternative, recreating the natural variation in colour that timber provides is a challenge. The natural features, which give timber its unique characteristics such as knots and gum veins are difficult to replicate at scale in a repeating pattern. Real timber veneer can provide this level of variation by using genuine timber as its coating, often making it indistinguishable from a traditional timber feature wall or ceiling.

Authentic material

Many designers try to avoid using materials in their projects, which can be seen as inauthentic. Often issues such as fire compliance conflict with this approach, as materials like timber do not meet the fire compliance requirements of a certain area. Our real timber veneer provides the best of both worlds by utilising actual timber as the coating while remaining fire compliant.

Sustainably sourced options

Where sustainability certification is required, our real timber veneer can be sourced while maintaining chain of custody requirements, allowing designers to find a balance between the unique needs of their project.

Available products

Aluminium Click-on Battens

Offering a wide range of finishes to complement the durable and lightweight properties of aluminium, this system provides a fire-rated linear texture for any project.

Click-on Cladding

Our aluminium Click-on Cladding rainscreen combines traditional tongue and groove cladding methodology with our unique clip connection, allowing for massive flexibility in design options in both interiors and exteriors.

Click-on Screens

Click-on Screens have been designed with minimal fixings to provide a clean, linear, 360-degree screen product. The open batten system can be crafted from either timber or aluminium and is perfect for applications such as freestanding screens and balustrade infills.

Want to see for yourself?

We offer free samples of all our wrapped aluminium products to the architecture and design community. Contact us with your specific requirements.

Architecture & Design Team

Advantages-of-timber-look-aluminium-in-design-1732067889.png

Sculptform

Let’s connect!