ASSA ABLOY Opening Solutions Australia presents the ASSA ABLOY ES8100 V-Lock.

Designed and assembled in Australia, the ES8100 incorporates many improvements over its Lockwood/Trimec predecessor, the ES8000, including a higher pre-load rating of 100kg, door position monitoring, integrated LED lock status and diagnostics visual indication, increased door misalignment from 7mm to 12mm, an IP53 rating for external door applications, and simple, one-step, PTO/PTL onsite configuration.

Although completely redesigned internally, the new ES8100 V-Lock body and faceplate retains the original footprint and is a direct retrofit to the original ES8000 model. The ES8100 strike plate utilises the same fixing locations but is 3mm wider to increase misalignment distance.

Key features of ES8100 V-Lock:

Unlocks under a pre-load of up to 100kg in 3-wire mode, 15kg in 2-wire mode
Locks under a pre-load of 20kg (12W) and 35kg (24W)
1000kg holding force
IP53 rated for external door applications
Door position and lock status monitoring
On-board visual lock status indication and diagnostics LED
Easy, one-step, Fail Safe (PTL) and Fail Secure (PTO) field selection
Optional surface/ glass mount kit
May be mounted vertically or horizontally (must not be mounted in the floor)
Allows for door misalignment of up to 12mm total (+/-6mm)
Operating voltage: 11.4 - 26VDC
Durability tested to 500,000 cycles (120N unlocking, 50N locking)

Applications

Single and double swing hinge doors
Doors subject to side load (pre-load)
Misaligned doors
Glass doors
Suitable for use with access control, intercom, keypad and card reader systems and doors requiring door position monitoring

Architecture & Design Team

ES8100_V_Lock_2.jpg

ASSA-ABLOY-ES8100-V-Lock-1732070282.png

ASSA ABLOY Opening Solutions Australia

Let’s connect!