The product 3001 from Nanovations offers a permanent solution against the slippery and unattractive appearance of moss and algae on concrete, pavers and absorptive natural stone.

The water based product penetrates deep into the substrate and dries up completely invisible.

The reduction of the water absorption results in fast drying surfaces where moss and algae will not find the appropriate growing ground. Slippery surfaces and unsightly discolorations can be avoided and the risk of falls can be reduced.

Due to the deep penetration of the product, surface abrasion does not have an effect on the function, even on high traffic areas like walk ways and drive ways.

Nanovations 3001 can be used on concrete, pavers and all absorptive natural stone. It is also suitable for facades, architectural concrete and infrastructure constructions like bridges.

The product is odour free and eliminates the health risks associated with solvent based products.

To add to the environmental benefits, 3001 will be shipped as a high concentrated solution. This reduces transport and storage costs and also reduces waste from empty packaging.

As a result, a 20 litre drum of concentrate is sufficient to treat up to 1000 square metre of concrete. In contrast 250 – 400 litre of conventional sealers are required to treat a similar area.

Areas of application

Concrete and masonry
Porous natural stone
Render
Bricks
Fibre cement sheets
Pavers
Exposed concrete facades
Concrete drive ways, car parks, bridges
Pre-cast architectural concrete

Product benefits and properties

Good penetration
Solvent free water based low VOC
Wear resistance
Reduced packaging material
Significant reduced shipping costs
Does not change the appearance
Salt resistant
Good efflorescence prevention
Cost effective

Architecture & Design Team

Permanent-prevention-of-moss-and-algae-on-concrete-1735059936.png

Nanovations Pty Ltd

Let’s connect!