The spigot has been designed to incorporate architectural designed windows and doors and will enhance the outdoor living area. It is capable of a deck mount or core drill into paving. It has no pins through the glass and has a clamp action on the glass with the ability to adjust whenever required.

If the glass is accidentally broken there is no need to remove the spigot. Preparation costs are minimised with no need for a channel in the concrete when installing the glass. Because the glass is elevated from the paving or decking, water and debris can flow underneath it, scum won’t build up on the bottom of the glass and the glass cannot get scratched when cleaning.

Features of the anodised aluminum spigot:

Spigot Comes with a 7 year warranty
Can be deck mounted or core drilled into paving
Frameless 12mm toughened Glass fencing
Semi- Frameless Glass
Wind rated posts certified.
Top rail frameless Glass fencing.
Pinned Glass
Glass can be removed without removing the spigot
No in ground channel required
No additional site preparation required
Glass is installed at end of the job reducing damage
Water can flow under the glass dirt and leaves are then not tyrapped oin the glass edge
Spigot is easy to clean
Larger sheets of glass can be used
Grouting and expansion joints are not required
No scaffolding required on high rise buildings
Spigot can be used on sloping sites
Gates can be hung directly on glass no posts required
Allows tiling to be completed prior to intallation
Spigot is non corrosive

The D1 anodised aluminum spigot is made available by Dimension One Glass Fencing .

Architecture & Design Team

D1-anodised-aluminum-spigot-for-12mm-frameless-gla-1735059129.png

Dimension One Glass Fencing Pty Ltd

Let’s connect!