Talking Architecture & Design Podcast (Episode 108) - Builder, designer and sustainability advocate David Coates gives the hard truth about sustainability Listen Now
My shortlist (0 item)
    WoodSolutions: Design and Build

    Design Guide #44: CLT acoustic performance

    The next generation of heavy timber building systems is about to transform the design and construction of many buildings in Australia.

    • Products that make up heavy timber construction include:
    • Cross-laminated timber (CLT)
    • Expan: post-stressed frames and box beams
    • Glulam and LVL beams, planks and floor systems

    An engineered timber building product, CLT is widely used internationally, particularly in Europe. Although it is not currently widely used in Australia, the potential for its specification in dividing walls, floors and ceilings is increasingly evident, particularly for multi-storey residential buildings. These buildings have acoustic requirements, stipulated in Australia by the National Construction Code, Building Code of Australia (BCA) or by a relevant Local Government Authority.

    The new guide contains the results of a research program into the acoustic performance of CLT in various system configurations, with the aim of demonstrating compliance with the NCC. The acoustic testing was managed by PKA Acoustic Consulting and carried out at New Zealand’s Auckland University Acoustic Laboratory.

    As CLT panels are available from different suppliers, the study used test panels from various manufacturers. The same CLT panel configuration from multiple suppliers was tested to allow for the variability of CLT products.

    The results show that with attention to design detail, CLT panels can readily meet or exceed the regulatory acoustic requirements in the Australian market

    Typical compliant floor and wall options are covered in the guide.

    Download Technical Design Guide #44 CLT Acoustic Performance here


    Please correct the errors and try again.

    Back to Top