Talking Architecture & Design Podcast (Episode: 55) - In this episode of Talking Architecture & Design, architect and lecturer Tone Wheeler looks at where we went wrong ... Listen Now
My shortlist (0 item)
    USG Boral

    Finishing joint compound – Sheetrock Dust Control

    Sheetrock Dust Control is a lightweight, premixed finishing compound designed for use as the final coat over plasterboard joints. The Sheetrock Dust Control system weighs up to 25% less than USG Boral's conventional joint compounds making it easier to handle. It also has minimal shrinkage and can help reduce work time. 

    The unique new formula reduces the amount of respirable airborne dust during sanding. Respirable dust is generated in work places when jointed plasterboard walls and ceilings are sanded using hand or mechanical sanders. Sheetrock Dust Control limits the pluming of sanded compound dust through air spaces. Technology contained in the product produces dust particles, which fall directly to the wall or floor junction and react better to the vacuum of mechanical sanders. The result is far less airborne dust, which results in a tidier worksite and a cleaner breathing environment. 

    Tested to the USA’s National Institute of Occupational Health and Safety (NIOSH) Method 0600, Sheetrock Dust Control produces respirable airborne dust at levels lower than the USA’s current Occupational Safety and Health Administration (OHSA) Permissible Exposure Limits (PELs) that are lower than the current PELs set by Safe Work Australia.

    Features & benefits:

    • Lightweight and premixed for easy use 
    • Minimal shrinkage
    • Reduces respirable airborne dust for cleaner air quality 

     

     

    Contact USG Boral
    Please correct the errors and try again.

    Brochures

    Contact USG Boral

    Contact USG Boral
    Please correct the errors and try again.

    CONTACT
    Back to Top