The WT-9002 IP65 GSM Intercom access control system from O’Briens Automatic Systems converts any existing intercom call point into a full GSM intercom system. 

The WT-9002 IP65 GSM Intercom access control system is ideal for secured residential and commercial complexes, with up to 1000 users.

GSM Intercom
The WT-9002 IP65 GSM Intercom access control system can also be operated with a two wire intercom, which can be installed outside the premises next to the gate as an intercom.  When the call button is pressed, the WT-9002 IP65 GSM Intercom access control system will dial out the phone number pre-set and inform the owner about the visitor at the gate. The owner can answer the call and speak to the visitor and open the gate with one of the buttons on the phone if the guest is to be allowed access.

The WT-9002 IP65 GSM Intercom access control system can be programmed to open the gate with a "Password", which can be accessed by keying in a four-digit PIN code into a mobile phone or landline. The caller can make three attempts at inputting the PIN before the system hangs-up the call  

The WT-9002 IP65 GSM Intercom access control system can be programmed with a "Master" phone number, which will enable the user to access to the unit from anywhere and allow them maintain the system. The "master number" can phone the WT-9002 IP65 GSM Intercom access control system and delete or add any user from the system without the need of accessing the unit on site.  

Other features of the WT-9002 IP65 GSM Intercom access control system include:  

  • Programmable functions
  • Ability to program up to 1000 users
  • Security lock status
  • System Self-Checking Fault Detection and send SMS text message to inform owner
  • Backup battery to prevent power failure