The Ditec OBBI swing gate operator from O’Briens Automatic Systems is ideally suited to DIY applications because no welding is required and all brackets bolt together for easy installation

OBBI External Automatic System
The OBBI geared motor has been designed according to the traditional basic concept of the ring / worm screw reduction gear. The OBBI swing gate operator’s structure houses a motor, a gear, the worm screw and an unlocking system. The OBBI swing gate operator is suitable for moving even gates with very small pillars, and has a voltage: 24V DC

The operation of the motor causes the ring and the worm – housed in a compact, anodized aluminium casing – to rotate, which in turn causes the movement of the gate leaf via the front connection.

The actuator’s very slim structure allows it to be integrated exceptionally well with the gate, and enables it to be assembled very easily. The geared motor has a considerable stroke and an opening angle of up to 110 degrees.

In the case of power failure, manual operation of the OBBI swing gate operator is always possible by unlocking the gear with a key, or automatic operation if a control panel with batteries is installed.

The Ditec OBBI Kitis supplied with 2 x Obbi Operators, 1 x D2H Control Board, 1 x Receiver Card and 2 x GOL4 Hand Transmitters/Remote Controls and lead with 3 pin plug fitted.

Benefits of Ditec OBBI Swing Gate Operator include:

  • Mounting brackets are bolted together, so no welding is required
  • Mounting brackets are flexible for different mounting arrangements
  • Easy to install
  • All necessary brackets come in the box
  • Takes up minimal side room