My shortlist (0 item)

    Banana-Skin two-component silicone elastomer from Adelaide Moulding and Casting

    Adelaide Moulding and Casting Supplies

    Banana-Skin is a two-component silicone elastomer that cures at room temperature by a Poly-addition reaction that may be accelerated by heating. Banana-Skin is designed as a 13 Shore A high tear strength rubber providing good physical properties for glove and skin moulding applications.
     
    Banana-Skin is great for moulds with large undercuts. Banana-Skin has high elongation and a coloured catalyst for easy mixing. Moulded parts can be produced without seams. Banana-Skin offers a low mixed viscosity and is available from Adelaide Moulding and Casting.

    Typical product uses: Skin moulds glove moulding moulds requiring a soft silicone moulding parts with large undercuts

    Typical catalysed properties mixed @ 23°C and 50% RH. Mix ratio A:B: 100:15 Mixed viscosity mPa s: 5,000

    Pot lives curing times processing temperature curing temperature 15°C 80 min 23°C 5 hrs 23°C 40 min 70°C 20 min 30°C 20 min 100°C 10 min

    Typical cured properties after 24hrs @ 23°c colour: translucent blue specific gravity: 1.03 Hardness (Shore A): 13 Tensile Strength (N/mm²): 3 Elongation (%): >700 Tear strength (N/mm): >10 Linear shrinkage (%): <0.1

    Please correct the errors and try again.

    You May Also Like:


    Related News

    View All
    Back to Top