Passive fire protection (PFP) coatings make structures more resistant to fire by insulating structural steel from high temperatures and as a result, buy time for the evacuation before structural collapse.
The Graco XM™ PFP Plural-Component Sprayer offers data reporting technology, so you can confirm that epoxy intumescent coatings are sprayed on-ratio, at requirements set by the manufacturer. The XM PFP is easy to use, maintains consistent temperature control and offers precise ratio control.
Count on Graco XM PFP for accurate, on-ratio mixing
| XM PFP | |
| U.S. |
Metric
Metric
|
| Mix Ratio Range |
1:1-10:1 (in 0.01 increments)
1:1-10:1 (in 0.01 increments)
|
| Ratio Tolerance Range (before alarm) |
+/- 5%
+/- 5%
|
| Maximum Flow Rate (measured with oil) |
3 gallons per minute
13.6 liters per minute
|
| Fluid Viscosity Range |
Handles mastic materials which are loaded into heated tankswith ram-fed priming piston pumps
Handles mastic materials which are loaded into heated tankswith ram-fed priming piston pumps
|
| Air Inlet |
1 in. npt(f)
1 in. npt(f)
|
| Fluid Inlets |
Pail (Feed Pumps)
Pail (Feed Pumps)
|
| Maximum Fluid Working Pressure for A and B Materials |
6000 psi
41 MPa, 414 bar
|
| Maximum Fluid Working Pressure for Flushing |
4500 psi
31 MPa, 310 bar
|
| Maximum Fluid Working Pressure for Heating |
100 psi
0.7 MPa, 7 bar
|
| Maximum Fluid Temperature |
160°F
70°C
|
| System Inlet Supplied Air Pressure Range |
80-150 psi
0.5-1.0 MPa, 5.5-10.3 bar
|
| Maximum Pump Air Pressure |
100 psi
0.7 MPa, 7 bar
|
| Maximum Tank Air Pressure |
90 psi
0.6 MPa, 6 bar
|
| Air Filtration |
40 micron main filter, 5 micron control air filter
40 micron main filter, 5 micron control air filter
|
| Ambient Operating Temperature Range |
32 to 130°F
0 to 54°C
|
| Ambient Storage Temperature Range |
30 to 160°F
-1 to 71°C
|
| Environmental Conditions Rating |
Altitude up to 13,123 ft
Altitude up to 4000 m
|
| Sound Pressure * |
86 dBA at 100 psi
86 dBA at 0.7 MPa, 7 bar
|
| Sound Power ** |
98 dBA at 100 psi
98 dBA at 0.7 MPa, 7 bar
|
| System Weight (empty, no fluid) |
2175 lb
987 kg
|
| Air Consumption | |
| Minimum |
100 scfm
2.8 meter³/min
|
| Maximum |
250 scfm
7.1 meter³/min
|
| Typical Application |
125-175 scfm
3.5-5.0 meter³/min
|
| Power Requirements | |
| Voltage (can be set with jumpers) |
Option 1: 220-240V, 3 phase DELTA (3 wire plus ground) Option 2: 380-400V, 3 phase WYE (4 wire including neutral plus ground)
Option 1: 220-240V, 3 phase DELTA (3 wire plus ground) Option 2: 380-400V, 3 phase WYE (4 wire including neutral plus ground)
|
| Wattage |
18,400 watts (23,400 with optional flush water heater)
18,400 watts (23,400 with optional flush water heater)
|
| Amps |
240V, 3-phase models: 65 Amps per phase full load: 380V, 3-phase models: 38 Amps per phase full load
240V, 3-phase models: 65 Amps per phase full load: 380V, 3-phase models: 38 Amps per phase full load
|
| Wetted Parts | |
| Suction Tube (Flush) |
Aluminum
Aluminum
|
| Tanks |
Stainless Steel
Stainless Steel
|
| Flush Pump |
Carbide, PTFE, stainless steel, UHMWPE
Carbide, PTFE, stainless steel, UHMWPE
|
| Hoses |
Nylon
Nylon
|
| A and B Metering and Feed Pumps |
Carbon steel, alloy steel, stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
Carbon steel, alloy steel, stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
|
| Dosing Valves |
Carbon Steel, nickel plating, carbide, polyethylene, leather
Carbon Steel, nickel plating, carbide, polyethylene, leather
|
| Manifold |
Carbon steel, nickel plating, carbide, stainless steel, PTFE
Carbon steel, nickel plating, carbide, stainless steel, PTFE
|
| Mixer |
Stainless steel housing with stainless elements
Stainless steel housing with stainless elements
|
| Approvals | |
| Machine |
CE, ETL
CE, ETL
|
| Pressure Tanks |
ASME, CE
ASME, CE
|
| Notes | |
| * Sound pressure measured 3.3 feet (1 meter) from equipment. | |
| ** Sound power measured per ISO-9614-2. | |
