My shortlist (0 item)

    DEVI Heating Systems

    DEVI Heating Systems use radiant heat to warm your home from the ground up. Rather than blow dry, dusty air around the house, DEVI floor heating provides a pleasant warmth for your feet and body by warming the floor surface. This is the perfect finishing touch to any room in your home.

    Electric floor heating goes particularly well under hard floor surfaces and does not take up valuable floor space. One of the great advantages of floor heating in the bathrooms is that heat is not lost in the exhaust air, as seen with convection heating. This form of heating considerably reduces the amount of traveling dust particles which is naturally a great relief to allergy and asthma sufferers.

    DEVI Thermostats allow you to heat specific rooms independently and can be programmed to automatically meet your weekday and weekend lifestyle:

    • 20 year warranty on cables and mats
    • Approved to Australian standards
    • After-sales service and support
    • Maintenance free
    • Total comfort heating
    • No ducts, radiators or vents
    • Hidden from view and does not take up valuable space
    • Can be applied under almost all hard surfaces
    • Minimal energy consumption
    • Reliable service
    • Silent and safe
    • Easy and inexpensive to install

    Devimat DSVF-150 Thin Heating Mats (c/w Two Cold Tails)
    Devimat DSVF-150 underfloor heating mat is designed to be as thin as possible. At only 2.5mm it is able to be installed into most quality two-part adhesives with a minimum increase in floor height. Devimat is suitable for connection to a "Continuous 24 hour" or "Time of use" tariff as a direct acting or background heating system. The Devimat "no step system" is typically used for installation into thin adhesive beds, self-levelling compounds or thin screeds on concrete floors, fibre cement sheeting or over existing tiles.

    Devimat DTIF-150 Thin Heating Mats (c/w Single Cold Tail)
    Devimat DTIF-150 uses a twin conductor heating cable for ease of installation and very low EMF. The mat thickness of only 3.5mm enables underfloor heating installations into most quality two-part adhesives with a minimum increase in floor height. Devimat is suitable for connection to a "Continuous 24 hour" or "Time of use" tarrif as a direct acting or background heating system. The Devimat "no step system" is typically used for installaton into thin adhesive beds, self-levelling compounds or thin screeds on concrete floors, fibre cement sheeting or over existing tiles.

    Devimat DTIF-100 Thin Heating Mats (c/w Single cold Tail) - For timber floors ONLY
    Devimat DTIF-100 uses twin conductor heating cable for ease of installation and very low EMF. They are suitable for installation in direct contact with the timber sub floors where no underlay or waterproofing membrane is to be applied. The mat thickness of only 3.5mm enables underfloor heating installations into most quality two-part adhesives with a minimum increase in floor height. Devimat "no step system" is typically used for installation into thin adhesive beds, self levelling compounds or thin screeds over and under wooden floors and over insulation.

    DSIG-20 - In Screed Cables (c/w Tw Cold Tails)
    DSIG-20 cables are suitable for connection to a "Continuous 24 hour" or "Time of use" tariff as a direct or background heating system. Typical applications are for installation in a screed bed or polished topping over concrete slabs.

    Deviflex 10T  - In Screed Cables (c/w Single Cold Tail) - Recommended for timber floors ONLY
    Deviflex 10T  cables are suitable for connection to a "Continuous 24 hour" or "Time of use" tariff as a background heating system. Typical applications are for installation in a screed bed or polished topping over and under wooden floors, over insulation, and for use in Devicell Dry Panels under manufactured floating timber floors. Deviflex 10T  is also used for soil warming and frost protection of pipes.

    Deviflex 18T - In Screed Cables (c/w Single Cold Tail)
    Deviflex 18T  cables are suitable for connection to an "Off-Peak" or "Time of use" tariff as a Storage Heating System or a "Continuous 24 hour" tariff as a direct acting or background heating system. Typical applications are for installation into concrete slabs and in a screed bed or polished topping over concrete slabs and where very low EMF is required.

    Deviflex DTCE-30 cables are most suited to be connected to an "Off-Peak" or "Time of use" tariff as a Storage Heating System. They have been designed for installation into concrete slabs under a wide variety or floor coverings. They have a twin conductor with a single cold tail. This makes them easy to install and with a very low EMF.

    Contact Devex Systems
    Please correct the errors and try again.

    Contact Devex Systems

    Contact Devex Systems
    Please correct the errors and try again.

    CONTACT
    • PO Box 707
    • Mona Vale
    • NSW 1660
    • Click to show

      1800 6 ...

    • Fax: 02 9997 7852
    • Visit Website
    Back to Top